Airlink101 APSUSB2 Network Card User Manual


 
Step 5 Click on the Tools link and select the port that a printer is connected to and click the Test button.
The Print Server will perform a low-level print test, bypassing the operating system layer. Perform the print
test for each port that has a printer connected to it.
Note: Your printer should print out a test page. If not, verify that the printer is powered on and all cables
are securely connected and try again. If the printer still fails to print a test page, please check the printer
compatibility list on our web site at www.airlink101.com for a list of compatible printers. If your printer is
not on the list, it may not be compatible with the Print Server.
Step 6 Once the printer successfully prints out a test page, you may close the web browser and proceed
to the next section.