Filter
Top Products
Hardware Installation
• Place the Switch on a smooth surface
• Connect the output of power cord to the power port of the Switch
• Connect your network device (Switch, Router, or PC) to one port of
the Switch using Category 5 or 6 UTP/STP cabling
• Connect another network device to another port of the Switch
Note: The cable distance between the Switch and a network device should
not exceed 100 meter. To reliably operate your network at 100Mbps, you
must use an Unshielded/Shielded Twisted-Pair (UTP/STP) Category 5 cable,
or better Data Grade cabling. While a Category 3 or 4 cable may initially
seem to work, it will soon cause data loss.
All kinds of IEEE802.3 compatible network device can connect to the Switch
by using straight-through wires or crossover wires because of Switch’s auto
MDIX function.
Specifications
Standard
• IEEE802.3 10Base-T Ethernet
• IEEE802.3u 100Base-TX Fast Ethernet
Network Media
• 100Base-TX – UTP/STP category 5 cable
• 10Base-T – UTP/STP category 3 or 5 cable
Connectors
• 8 RJ-45 ports for 10/100Mbps TX
Forwarding Method
• Store and Forward
MAC Address Table
• 1K
Buffer Memory Size
• 768K bits
Access Method
• CSMA/CD
LED indicators
• Power (per unit)
• Link/Activity (per port)
Dimension
• 131mm(L) x 71mm(W) x 28mm(H)
Temperature
• Operating: 0° ~ 50°, Storage : - 20° ~ 70°
Humidity
• Operating: 10% ~ 90% RH, Storage: 5% to 90% RH
Power
• Input: 100-240V AC, 50~60Hz
• Output: DC 9V / 700mA
Certifications
• FCC, CE
Warranty
• 1-Year Limited Warranty
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Website: www.airlink101.com
*Actual throughput will vary. Specifications are subject to change without notice. All products and
trademarks are the property of their respective owners. Photos of product may not reflect actual
content. Copyright ©2009 Airlink101®
Section 3
Section 4
Section 5