Filter
Top Products
Enter the encryption settings for the network and click OK to complete the
connection.
If the network you are attempting to connect to does not have encryption enabled,
you will recieve a warning about connecting to an unsecured network. Click OK
to complete the connection.
If the network you are attempting to connect to is configured for encryption, the
following window will appear:
You should now be connected. Click on the general tab to check the status of
your connection. It should say Associated next to status, and there should be
green bars next to Signal Strength and Link Quality.
Windows Vista Users: To connect to a network using the Windows Vista utility,
right click on the networking icon down in the bottom right hand corner.
Then click on Connect to a network.
Select your network from the list and click Connect.
If the network you are connecting to does not have encryption enabled, you will
see the following warning: