Filter
Top Products
a peer network client without the use of an access point
Infrastructure: for connecting to an access point only
Ad-Hoc: for connecting directly to another wireless client without using an
Access Point or wireless router. (Both wireless clients must be set to using Ad-
Hoc mode).
Automatically connect to non-preferred networks: Check the box to connect
to non-preferred networks upon startup.
Advance Setting:
Disable Radio: Check the box to disable the radio signal
Radio Frequency: 802.11b/g switches automatically between 802.11b and
802.11g speed depending on the other wireless devices. 802.11b will only
connect at 802.11b speed (11 Mbps or lower).
Start ad hoc network: Choose the appropriate frequency for your ad-hoc
network
Ad-Hoc Channel: Choose the desired channel for your ad-hoc network. All
devices in the ad-hoc network must use the same channel.
Power save Mode:
Fast Save - This setting consumes half the power.
Max Save - This setting consumes the least power.
Disable - This default setting consumes the most power.
Transmit Power: Choose to transmit power from 100%, 50%, 25%, 12.5% and
Lowest.
Super G: Enable or Disable the Super G function (108Mbps). In order to transfer
speeds at 108 Mbps, all wireless devices must be Super G compatible and set to
use Super G.
eXtend Range: Enable or Disable eXtend range
Fragmentation Threshold: Set the desired fragmentation threshold
RTS Threshold: Set the desired RTS threshold