Filter
Top Products
22
4.3.3 Advanced
The Advanced tab allows you to fine-tune the Adapter’s wireless settings.
Transmit Power Level: Use the drop-down menu to select the desired transmit
power level for the Adapter.
Wireless Mode: By default, all modes are enabled. To disable a mode, uncheck
the corresponding check box.
Power Save Mode: Select the desired power save mode.
Network Type: Choose between Infrastructure or Ad-Hoc.
Note: You will not be able to access the Internet if you set the Adapter to Ad-
Hoc mode. To allow other wireless clients to access the Internet through the
Adapter in Ad-Hoc mode, you will need to configure your computer as a router
and a DHCP server. The vendor will not provide any technical support in regards
to the USB adapter functioning as an access point.
802.11b Preamble: Choose between Short & Long or Long Only.