Filter
Top Products
11
If the network that you are attempting to connect does not have encryption enabled, you
will receive a warning about connecting to an unsecured network. Click OK to complete
the connection. Go to Step 6.
Step 5 Enter the network security key of your wireless router or AP into Network key and
Confirm network key boxes.
The Adapter may automatically detect the type of Network Authentication and Data
Encryption. You need to enter the security settings in the Network key, Confirm
network key boxes according to the settings of the wireless router or AP then click OK
to connect.
Step 6 The connection is now established. You can check the status of your connection
under “Link Status” tab. The Connection should be Connected, and there should be a
blue bar displaying the Signal Strength.