Alcatel-Lucent 6850 Switch User Manual


 
18 Alcatel-Lucent | OmniSwitch 6850
Ordering information
POWER SUPPLIES
OS6850-BP-P OS6850-BP-P modular 360W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection
cable, country specific power cord, power shelf and connecting ears.
OS6850-BP-PH OS6850-BP-PH modular 510W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection
cable, country specific power cord, power shelf and connecting ears.
OS6850-BP OS6850-BP modular 126W AC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable, country specific power cord, power shelf and connecting ears.
OS6850-BP-D OS6850-BP-D modular 120W DC backup power supply. Provides backup power to one non-PoE switch.Ships with chassis
connection cable, power shelf and connecting ears.
10 GIGABIT ETHERNET TRANSCEIVERS (XFP MSA)
XFP-10G-LR 10 Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector.
Typical reach of 10 Km on 9/125 µm SMF
XFP-10G-SR 10 Gigabit Ethernet optical transceiver (XFP MSA).Supports multimode fiber over 850nm wavelength (nominal) with an LC
connector.Typical reach of 300m on 50/125 µm MMF.
XFP-10G-ER40
Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC
connector
.Typical reach of 40 Km on 9/125 µm SMF.
XFP-10G-ZR80 10 Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC
connector.Typical reach of 80 Km on 9/125 µm SMF.
GIGABIT ETHERNET TRANSCEIVERS (SFP MSA)
SFP-GIG-EXTND Extended 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength
(nominal) with an LC connector. Reach of up to 2 km (based on grade and condition of fiber) on 62.5/125 µm MMF or 550m on
62.5/125 µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.
SFP-GIG-LH40 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength (nominal)
with an LC connector.Typical reach of 40 Km on 9/125 µm SMF.
SFP-GIG-LH70 1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550 nm wavelength (nominal)
with an LC connector.Typical reach of 70 Km on 9/125 µm SMF.
SFP-GIG-LX 1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal)
with an LC connector.Typical reach of 10 Km on 9/125 µm SMF.
SFP-GIG-SX 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with
an LC connector.Typical reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.
DUAL SPEED TRANSCEIVERS (SFP MSA)
SFP-DUAL-MM Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 1310nm
wavelength (nominal) with an LC connector.Typical reach of 550m at Gigabit speed and 2km at 100Mb speed.
Note: at 100Mb speed, this SFP can interoperate with SFP-100-LC-MM or similar transceiver on the other end.
At Gigabit speed, this SFP cannot interoperate with SFP-GIG-SX or similar transceiver on the other end (
as it runs over 850nm wavelength).
SFP-DU
AL-SM10
Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm
wavelength (nominal) with an LC connector.Typical reach of 10km at Gigabit speed and 100Mbit speed.
Note: at 100Mbit speed, this SFP can interoperate with SFP-100-LC-SM15 or similar transceiver.At Gigabit speed, this SFP can
interoperate with SFP-GIG-LX or similar transceiver
.
100FX
TRANSCEIVERS (FOR OS6850-U24X SFP POR
TS ONL
Y)
SFP-100-LC-MM 100Base-FX SFP transceiver with an LC type interface.This transceiver is designed for use over multimode fiber optic cable.
SFP-100-LC-SM15
100Base-FX SFP transceiver with an LC type interface
.
T
his transceiver is designed for use over single mode fi
ber optic cable
up to 15KM.
SFP-100-LC-SM40 100Base-FX SFP transceiver with an LC type interface.This transceiver is designed for use over single mode fiber optic cable
up to 40KM.
SFP-100-BX20L
T
100Base-BX SFP transceiver with an SC type interface.This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 20KM point-to-point.
This transceiver is normally used in the central office (OLT) transmits
1550nm and receives 1310nm optical signal.
SFP-100-BX20NU 100Base-BX SFP transceiver with an SC type interface.This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 20KM point-to-point.This transceiver is normally used in the client (ONU) transmits 1310nm
and receives 1550nm optical signal.