Alcatel-Lucent 6850-P48 Switch User Manual


 
June 2007 Files and Directories 25
Working and Certified Are Different
If the software in the /flash/working directory differs even
slightly from the software in the /flash/certified directory, the
switch will automatically run from the /flash/certified
directory.
When the switch runs from the /flash/certified directory,
configuration changes cannot be saved via the write memory
command.
My Working and Certified directories are different. Can
I force a reboot from the Working directory?
Yes. If its configuration and image files are known to be reli-
able, you can override the default and initiate a reboot from the
/flash/working directory. This is done via the
reload working command. For more information, refer to
your OmniSwitch CLI Reference Guide.
Note. For detailed information on using directories, refer
to the “Managing CMM Directory Content” chapter in the
OmniSwitch 6800/6850/9000 Switch Management Guide.
Working
Directory
revised_boot.cfg
K2base.img
K2release.img
Etc.
Certified
Directory
boot.cfg
K2base.img
K2release.img
Etc.
Certified
Directory
boot.cfg
K2base.img
K2release.img
Etc.
Working
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Working and Certified
contents are different.
The switch runs
from Certified.
Working
Directory
revised_boot.cfg
K2base.img
K2release.img
Etc.
Certified
Directory
boot.cfg
Hbase.img
Hrelease.img
Etc.
Certified
Directory
boot.cfg
K2base.img
K2release.img
Etc.
Working
Directory
revised_boot.cfg
K2base.img
K2release.img
Etc.
Working and Certified
contents are different.
The reload working
command overrides
the default; the
switch runs from
Working.