www.aleratec.com
43
Using the 1:1 HDD Cruiser
Advanced Setup Menu
10-09 USB Auto-Link
This function sets the 1:1 HDD Cruiser to immediately enter USB mode on
startup. This allows direct control of the unit
from a PC.
1. Press and hold ESC for about three seconds to access the “Adv Setup”
menu. The following screen will be displayed.
2. Use the arrow buttons (or) to select “USB Auto-Link”. The following
screen will be displayed.
3. Press ENT to display the available options. The default is “OFF”.
4. Use the arrow buttons () to toggle the option “ON” or “OFF”. If set to
“ON” the unit will immediately enter USB mode on startup.
ESC
10. Adv Setup
ENT
ESC
10-09. Adv Setup
USB Auto-Link
ENT
ESC
USB Auto-Link
OFF
ENT
ESC
USB L.H Mode
D1:HDD D2:HDD
ENT