Filter
Top Products
Set the XTALK value.
1. Press the Ext Trig button twice to enter the
page
showing the
parameters for XTALK DCAY, and
NOISE.
2. After
selecting the desired trigger
(tom
1), place
the cursor
under the XTALK parameter value.
3.
Now,
gradually
increase
the
XTALK
level
of the tom
1
trigger
until
it
stops triggering when
you hit
the snare
pad
(00
is
minimum, 99 maximum).
A properly adjusted
crosstalk
level will stop the
pad's
interaction,
and
still allow
you
to
play
quick hits
without
loosing
any notes.
8. DECAY
Note:
In
this scenario
we
will
use only the snare
pad.
Depending on the type of
pads
being
used
and
your
mounting
configuration, you may be experiencing some
"double
triggering".
If
shortly
after
the
initial strike to the snare
pad it re-
triggers or sounds
a
second time, the
pad is
"double
triggering".
This
can
be controlled by altering the
DCAY parameter value.
Set the DCAY value.
1. First
select the snare
trigger.
2. Now
place
the cursor under the DCAY
parameter
value.
3.
Gradually
increase the value
until the snare stops double
triggering on
hard hits.
A properly adjusted DCAY
parameter will end double triggering,
and
still
allow you to
play
fast, repetitive
hits on the snare
pad.
NOISE
Nofe: In
this scenario
we will be
using
the
tom 1 and the tom
2
pads in a live performance situation.
The two tom
pads are
mounted
together
on
a
single
floor
stand,
and the crosstalk
and