Allied Telesis AT-A39/T Network Card User Manual


  Open as PDF
of 2
 
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters |Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2006 Allied Telesis Inc.All rights reserved.Information in this document is subject to change without notice. All company names,logos,and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00458-00 Rev. G
Rapier Series Uplink Modules | Gigabit & Fast Ethernet
Model Port Connector Cable Type
1
Max Cable Length
AT-A35/SX 1000SX SC 50/125 micron
multimode fiber
62.5/125 micron
multimode fiber
550 m (1,804ft)
2
275 m (902ft)
3
AT-A35/LX 1000LX SC 9/125 micron
singlemode fiber
50/125 or 62.5/125
micron multimode fiber
3km (1.8mi) increasing to
10km (6mi) if linking
two 1000LX models
550m (1804ft)
2
AT-A39/T 10/100/1000T
4
RJ-45 CAT5
CAT5E
100 to 150m (328 to 492ft)
200m (656ft)
AT-A40/SC 100FX
(multimode fiber, 1300nM)
SC 50/125 or 62.5/125
micron multimode fiber
2km
A
T-A40/MT
100FX
(multimode fiber, 1300nM)
MT
-RJ
50/125 or 62.5/125
micron multimode fiber
2km
AT-A41/SC 100FX
(multimode fiber, 1300nM)
SC 50/125 or 62.5/125
micron multimode fiber
2km
AT-A41/MT N100FX
(singlemode fiber, 1300nM)
MT-RJ 9/125 micron
singlemode fiber
15km
AT-A42/GBIC 1000X Varies per GBIC Refer to GBIC documentation Refer to GBIC documentation
(ATR)
Model
singlemode/
multimode
Wavelength Tx power (dBm) Sensitivity (dBm) Saturation (dBm)
AT-A35/SX multimode fiber 850 -4 to -9.5 -12.5 @ 62.5uM,
-13.5 @ 50uM
0
A
T-A35/LX
singlemode fiber
multimode fiber
multimode fiber
1310 -3 to -9.5@9uM,
-3 to -11.5@62.5uM,
-3 to -11.5@50uM
-20 -3
AT-A40/SC multimode fiber 1310 -14 to -19@62.5uM,
-14 to -22.5@50uM
-34.5 -14
AT-A40/MT multimode fiber 1310 -14 to -19@62.5uM,
-14 to -22.5@50uM
-34.5 -14
A
T-A41/SC
singlemode fiber 1310 -14 to -20 -31 -8
AT-A41/MT singlemode fiber 1310 -14 to -20 -31 -8
Competitive Matrix
Ordering Information
AT-A35/SX
1 x 1000SX/SC uplink with SC connector
AT-A35/LX
1 x 1000LX/SC uplink with SC connector
AT-A39/T
1 x 1000T uplink with RJ-45 connector
AT-A40/SC
100FX multimode fiber uplink
with SC connector
AT-A40/MT
100FX multimode fiber uplink
with MT connector
AT-A41/SC
100FX singlemode fiber uplink
with SC connector
AT-A41/MT
100FX singlemode fiber uplink
with MT connector
AT-A42/GBIC
Uplink module with 1 GBIC bay
(Uses Allied Telesis standards-based
GBIC modules. GBIC ordered separately)
1. Refer to the IEEE 802.3 standards for further cable information.
2. Assumes a fiber optic cable rating of 500 Mhz/Km.
(Maximum cable length is 500m at a cable rating of 400 Mhz/Km.)
3. Assumes a fiber optic cable rating of 200 Mhz/Km.
(Maximum cable length is 220m at a cable rating of160 Mhz/Km.)
4. Early versions of the AT-A39/T operate at 1000Mbps only.
10/100/1000Mbps operation is available only if the AT-A39/T
Uplink Module is installed in a Rapier G6, Rapier G6F or
Rapier i model, otherwise operation is fixed at 1000Mbps.
 previous