Allied Telesis AT-FS750/16 Switch User Manual


 
AT-FS750/16 and AT-FS750/24 Fast Ethernet Smart Switches Installation Guide
29
Cable Specifications
Table 5 lists the cable specifications for the twisted pair ports.
Note
The twisted pair ports on the switch feature auto-MDI when
operating at 10, 100 or 1000 Mbps. A port is automatically
configured as MDI or MDI-X when connected to an end node.
Consequently, you can use straight-through twisted pair cable when
connecting any type of network device to a port on the switch.
Table 5. Twisted Pair Cabling and Distances
Speed Type of Cable
Maximum
Operating
Distance
10 Mbps Standard TIA/EIA 568-B-compliant
Category 3 or better shielded or
unshielded cabling with 100 ohm
impedance and a frequency of 16
MHz.
100 m (328 ft)
100 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5
(Cat 5e) shielded or unshielded
cabling with 100 ohm impedance
and a frequency of 100 MHz.
100 m (328 ft)
1000 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5
(Cat 5e) shielded or unshielded
cabling with 100 ohm impedance
and a frequency of 100 MHz.
This speed applies only to the two
10/100/1000Base-T ports.
100 m (328 ft)