Installation and Safety Guide 27
613-000313 Rev D
AR450S Router
This section describes how to install the AR450S router.
■ “Installing the AR450S” below
■ “Configuring the AR450S” on page 29
■ “Connecting Data Cables to the AR450S” on page 33
■ “System LEDs on the AR450S” on page 34
For corresponding information about installing an AR415S, see “AR415S Router” on
page 6.
For corresponding information about installing an AR440S, AR441S or AR442S, see
“AR440S, AR441S, AR442S Routers” on page 15.
Installing the AR450S
Selecting a Site
You can install the router:
■ on a level surface such as a desktop or bench
■ in a standard 19-inch rack, using the rack-mount kit supplied with the router
When you install the router, choose a site that:
■ allows adequate airflow around the router and its vents
■ is free of dust and moisture
■ will maintain ambient temperature in the range 0 ºC to 40 ºC (32 ºF to 104 ºF)
and humidity in the range 5% to 80% non-condensing
■ has a reliable and earthed (grounded) power supply, preferably dedicated and
filtered
■ does not expose cabling to sources of electrical noise such as radio transmitters,
broadband amplifiers, power lines, electric motors, and fluorescent fixtures
■ allows easy access to the router’s power and cable connections
Before Installing the Router
■ Read the safety information in “Safety” on page 39.
■ Unpack the router. Verify the package contents. If any items are damaged or
missing, contact your sales representative.