Filter
Top Products
Enabling and Installing this Release 2
Version 281-01
C613-10482-00 REV A
Caution: Using a maintenance version on the wrong model may cause unpredictable results, including disruption to the network.
This maintenance release note should be read in conjunction with the Release Note for Software Version 2.8.1.
Caution: Information in this release note is subject to change without notice and does not represent a commitment on the part of Allied Telesis Inc. While every
effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis Inc. can
not accept any type of liability for errors in, or omissions arising from the use of this information.
Enabling and Installing this Release
To use this maintenance release you must have a base release license for Software Release 2.8.1. Contact your distributor or reseller for more information. To
enable this release and install it as the preferred release, use the commands:
enable rel=xx281-01.rez num=2.8.1
set install=pref rel=xx281-01.rez
where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an AR440S router, use the commands:
enable rel=54281-01.rez num=2.8.1
set install=pref rel=54281-01.rez
AT-8948, x900-48FE, x900-48FE-N x900-48 89281-01.rez 26 July 2006 4786652 -
AT-9924T, AT-9924SP, AT-9924T/4SP AT-9900 89281-01.rez 26 July 2006 4786652 9924_281-01_en_d.rsc
AT-9812T, AT-9816GB AT-9800 sb281-01.rez 26 July 2006 3865056 9812_281-01_en_d.rsc
9816_281-01_en_d.rsc
Models Series Release File Date Size (bytes) GUI file