Chapter 17: RADIUS and TACACS+ Clients
212
Figure 75. TACACS+ Add Page
2. Enter the following settings:
IP Address— Enter the IP address of the TACACS+ server. The
IP address must be in the following IPv4 format: xxx.xxx.xxx.xxx.
Key— Enter the encryption key for TACACS+ communications
between the switch and TACACS+ server. The key must match the
encryption key used by the TACACS+ server. The maximum
length is 39 characters. Special characters are allowed, but spaces
are not permitted.
3. Click Save.
4. Click SAVE
to save your changes to the startup configuration file.