Chapter 25: LLDP and LLDP-MED
308
Selecting LLDP TLVs on a Port
To enable LLDP TLV, do the following:
1. Select the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 123 on
page 302.
2. From the Discovery & Monitoring tab, select LLDP.
The LLDP tab is displayed.
3. From the LLDP tab, select TLV.
The LLDP TLV tab is displayed in Figure 127.
Figure 127. LLDP TLV Tab
4. Move your cursor to the right and select TLV again.
The LLDP TLV page is displayed. See Figure 128 on page 309.