Filter
Top Products
Page 42 | AlliedWare™ OS How To Note: EPSR
Debugging
Transit Node (Node B) Debug Output
The following debugging shows the same events as the previous section, but on the transit
node instead of the master node. It starts with the ring established and in a state of
Complete.
The transit node receives Health messages on port
1
, because that port is connected to the
master node’s primary port. Note that in the System field, this output shows the MAC
address of the source of the message—the master node in this case.
This is the packet shown in step 1 on page 36 of the master node debug output.
1. The transit node receives Health messages
EPSR Port1 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b
00bb0100 00541f2a 00000000 0000cd28 0619990b 00400105 03e80000
00000000 cd280619 00010002 010000be
EPSR Port1 Rx:
-----------------------------------------------------------------------
TYPE = HEALTH STATE = COMPLETE
CTRL VLAN = 1000 SYSTEM = 00-00-cd-28-06-19
HELLO TIME = 1 FAIL TIME = 2
HELLO SEQ = 190
-----------------------------------------------------------------------
Manager 9924-B>
EPSR Port1 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b
00bb0100 00541f29 00000000 0000cd28 0619990b 00400105 03e80000
00000000 cd280619 00010002 010000bf
EPSR Port1 Rx:
-----------------------------------------------------------------------
TYPE = HEALTH STATE = COMPLETE
CTRL VLAN = 1000 SYSTEM = 00-00-cd-28-06-19
HELLO TIME = 1 FAIL TIME = 2
HELLO SEQ = 191
-----------------------------------------------------------------------
.
.
.
Manager 9924-B>
EPSR Port1 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b
00bb0100 00541eef 00000000 0000cd28 0619990b 00400105 03e80000
00000000 cd280619 00010002 010000f9
EPSR Port1 Rx:
-----------------------------------------------------------------------
TYPE = HEALTH STATE = COMPLETE
CTRL VLAN = 1000 SYSTEM = 00-00-cd-28-06-19
HELLO TIME = 1 FAIL TIME = 2
HELLO SEQ = 249
-----------------------------------------------------------------------