Filter
Top Products
AlliedWare Plus Version 2.1.2 Software Release Notes
PN 613-001447 Rev A 8 Allied Telesis, Inc.
Port-based and tagged VLANs: You could not change a port from the trunk mode to the
access mode. (8319)
IGMP snooping: The switch did not properly register IGMP queries and reports. (8301)
sFlow client: The switch stopped forwarding traffic if the sFlow client was active on more than
twelve ports. (8236)
STP and enhanced stacking: The switch stopped forwarding traffic if both STP and enhanced
stacking were activated. (8246)
STP: The switch would reset if the spanning tree protocol detected a loop in the network
topology. (8094)
STP: The spanning tree protocol stopped sending BPDUs when the SNTP client
synchronized system time with an NTP or SNTP server. (8605)
STP: The spanning tree SHOW commands did not display the settings for BPDU guard, root
guard, portfast and other parameters. (8639)
RADIUS client: The RADIUS acronym was misspelled in the web browser interface. (8625)
GVRP: Dynamic GVRP VLANs were saved as static VLANs in the active boot configuration
file. They are now relearned when the unit is reset. (8321)
ACLs: The copy-to-mirror option did not work. (8675)
LACP: The switch disabled the remaining ports of an eight port LACP trunk if the connections
were lost on four of the ports. (8599)
LACP: LACP trunks caused the switch to display a “Kernel paging request” error message
and to reset. (8618)
LACP: The switch would reset if a port in an LACP trunk that had 20 or more ports lost its
connection.(8638)
LACP: There was a delay in the resumption of traffic on LACP connections that changed link
states. (8619)
LACP: Fluctuating connections in LACP trunks resulted in IPC errors. (8622)
Telnet server: You could not overwrite existing encryption keys from a Telnet management
session. (8616)
SSH server: You could start a remote SSH management session without having to enter a
username. (8712)
SSH server: The switch did not properly timeout inactive remote SSH management sessions.
Known Issues
There are no known issues in this release.