Filter
Top Products
AT-GS950/16PS Switch Web Interface User’s Guide
165
6. To assign ports to the VLAN, click on the port numbers labeled Group
Member.
7. Click Apply.
8. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify a Port-
Based VLAN
To modify the name or port assignments of a port-based VLAN, perform
the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN.
An example VLAN (Index 2, Sales VLAN) is shown in the table at the
bottom of AT-GS950/16PS Port-Based VLAN page. See Figure 55.
Figure 55. Example of AT-GS950/16PS Port Based VLAN Page
4. In the VLAN Action column, click Modify next to the VLAN that you
want to change.
5. Delete a Port-Based VLAN
To delete a port-based VLAN, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.