Allied Telesis AT-IMG646BD Network Card User Manual


 
Allied Telesis
www.alliedtelesis.com
AT-iMG646BD-ON | Outdoor Ethernet intelligent Multiservice Gateway
Allied Telesis
www.alliedtelesis.com
Management
Easy to Deploy and Manage
Fiber-To-The-Home (FTTH) with the
AT-iMG646BD-ON has never been easier.
The AT-EN646 Outside Plant Enclosure may
b
e pre-installed, and accommodates fiber
t
ermination and grounding for the iMG. When
s
ervices are ordered, the iMG646BD-ON
electronics chassis mounts easily into the
enclosure, and will terminate in-home wiring
and power connection.
Zero Touch Configuration with the ZTC
The AT-iMG646BD-ON is designed to be easy
to deploy and manage.With the Zero Touch
Configurator (ZTC) software platform, the
AT-iMG646BD can be provisioned and
managed remotely.The Zero Touch
Configurator is a distributed configuration
system based on the industry’s standard
Lightweight Directory Access Protocol (LDAP)
database architecture.This provides secure
authentication and registration plus intelligent,
automatic configuration of remote iMG units. Its
XML-based str
ucture enab
les seamless
integration with service providers’ existing OSS
platforms.
Specifications
User’s Ports
6 x 10/100TX (RJ45)
4 x VoIP FXS ports (RJ-11)
WAN Ports
100BX Single-Fiber (BX, SC/UPC)
TX 1310 nm, RX 1550 nm
Range 15 Km
Power Budget 17 dB
Layer 2 Operation
Layer 2 wirespeed packet switching
IGMP v1/v2 Multicast Support
Tag-based IEEE 802.1Q VLANs (16 max.)
IEEE 802.1p prioritization
IEEE 802.1Q tag insertion and stripping
Programmable Rate limiting ingress/egress (32,000 steps)
Port Mirroring ingress/egress traffic
Double QoS queue on each por
t
Port speed selection 10, 100 or 10/100
1,000 MAC addresses
Layer 3 Operation
NAT
PPPoE
Stateful Inspection Firewall
I
ntrusion Detection and Blocking System
IPSec/VPN passthrough
Virtual Server
Global IP address pool
D
ynamic port opening
DHCP client, server and relay
DNS proxy
PAP/CHAP authentication
Static and Dynamic IP address assignment
R
IPv1/v2
VoIP Protocols
H.323 3.0
SIP 2.0
MGCP/NCS 1.0
VoIP Ports
G.711 a-law and µ-law 64kbps
G.723 (optional)
G.726 16/24/32/40kbps
G.729 8kbps
G.168 LEC 8-32m/sec
T.38 Fax Relay
Automatic Fax/Modem Detection
Voice Activity Detection (VAD)
Comfort Noise Generation (CNG)
Error Mitigation/Bad Frame Interpolation
Adaptive jitter buffer
REN: 5 per FXS port
RTP voice packet encapsulation
Class 5 Services
Call transfer
Call waiting
Call hold
Message waiting
Caller ID
Network Management
Zero Touch Configurator
Local console por
t
Telnet
Remote software upgrade
DHCP
W
eb GUI (optional)
LED Status Indicators
Power
System
POTS Use/Ready/Ringing
W
AN Link/Activity
LAN Link/Activity
Technical Specifications
Power Characteristics
External power supply
Input 12vDC, 1.5A
P
ower Consumption 10W (typical)
18W (maximum)
Environmental Specifications
Operating Temperature -40ºC to +60ºC
Storage Temperature -40ºC to +80ºC
Operating Humidity 5% to 95% RH
Physical Characteristics
AT-EN646 Enclosure
Dimensions 16.7 x 11.7 x 4.7 in.
(H x W x D)
Weight 3.6 lbs
AT-iMG646BD-ON
Dimensions
12 x 8.7 x 1.2 in.
(H x W x D)
Weight 2.65 lbs
Protocols and Standards
IPv4 RFC 791
TCP, UDP RFC 1144
IGMP (v1/v2) RFC 1112, 2236
PPPoE RFC 2516
PAP RFC 1334
CHAP RFC 1994
NAT RFC 1631
DHCP RFC 2131
VLAN IEEE 802.1p/Q, IEEE 802.1d,
IEEE 802.2, IEEE 802.3x
SNMP v1,v2,v3
RTP/RTCP
TFTP RFC 1350
Telnet RFC 318
ARP RFC 826
H.323 4.0
SIP 2.0 RFC 3261
MGCP/NCS 1.0
Codecs G.711, G.726, G.729
Approvals
CE Marking
Saftey EN60950-1 (TUV), EN60825-1,
UL 60950-1 (cULus), CSA C22.2
No.
60950-1
Emission FCC Part 15 Class B
EN 55022 Class B
Immunity EN 55024
Softswitch Interoperability
Cirpack,
Net Centrex,
Sonus Netw
orks
, Marconi, Siemens,
Alcatel, Audiocodes, Mediatrix, Arelnet, HotSIP, Iptel, Italtel,
Lucent, Netmeeting, Nuera, OKI, Open H.323
Warranty
Two years