Filter
Top Products
AT-S101 Version 1.3.0 Software Release Notes
PN 613-001604 Rev A 2 Allied Telesis, Inc.
Features History
Version 1.2.0 Software Features
The SNTP (Simple Network Time Protocol) feature has been added.
Version 1.1.0 Software Features
Management access can now be restricted to the default VLAN (VLAN 1). This feature is
activated when you select ENABLE for the Management VLAN field on the Tagged VLAN
management web page. If this field is set to DISABLED, the management access is available
on any VLAN. See the illustration below for the location of this feature.
Version 1.0.0 Software Features
The AT-S101 Version 1.0.0 Management Software supports the following features:
Web-based interface
Dynamic Host Configuration Protocol (DHCP)
Port-based and tagged VLANs
Quality of Service (QoS) support
Port trunking supporting static and LACP (Link Aggregation Control Protocol) port trunks
Port mirroring
Spanning Tree (STP) and Rapid Spanning Tree (RSTP)
IGMP Snooping supporting IGMP versions 1 and 2
Simple Network Management Protocol (SNMP) versions SNMPv1 and SNMPv2c
Bandwidth Control
MAC address table with a storage capacity of 8,000 entries
Static multicast addresses
802.1x Port-based Network Access Control (IEEE 802.1x)
Remote Authentication Dial In User Services (RADIUS) client