![](http://pdfasset.owneriq.net/4/6f/46f26dff-5467-4b1f-995c-75aa65d1804f/46f26dff-5467-4b1f-995c-75aa65d1804f-bg5f.png)
x600 Layer 3 Gigabit Ethernet Switch Installation Guide
95
Transceiver is Installed but the Status is “Not Present”
If a SFP or XFP transceiver is installed in a transceiver slot but the Uplink
Information menu in the AlliedWare Plus Operating System Software
interface displays “Not Present” for that port, do the following:
Verify that the transceiver is completely inserted in the slot on the front
of the switch.
Note
The uplink status does not reflect whether a fiber optic cable is
connected to the transceiver.