Filter
Top Products
Hierarchy of the Different Filters
Page 10 | Use Route Maps and Other Filters to Filter and Alter BGP and OSPF Routes
Confirming the neighbor relationship
Check that each switch sees the interface route advertised from the other switch. On both
the AlliedWare Plus and AlliedWare switches, use the command show ip route.
awplus#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
B 45.0.0.0/8 [20/0] via 45.45.45.46, vlan1, 00:18:10
C 45.45.45.0/24 is directly connected, vlan1
B 52.0.0.0/8 [20/0] via 45.45.45.46, vlan1, 00:18:10
C 64.0.0.0/4 is directly connected, vlan64
Manager BGP peer> show ip route
IP Routes
---------------------------------------------------------------------
Destination Mask NextHop Flags Interface Age
Type Policy Protocol Tag Metrics Pref
---------------------------------------------------------------------
45.0.0.0 255.0.0.0 0.0.0.0 ----- vlan1 2128
direct 0 interface - 1 0
45.45.45.0 255.255.255.0 45.45.45.45 ----- vlan1
99
3
remote 0 bgp - 2 170
52.0.0.0 255.0.0.0 0.0.0.0 ----- vlan2 1642
direct 0 interface - 1 0
64.0.0.0 240.0.0.0 45.45.45.45 S---- vlan1
99
3
remote 0 bgp - 2 170
--------------------------------------------------------------------
AlliedWare Plus
switch
AlliedWare
switch