Filter
Top Products
21
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
In Task Setting, there are Test Scenarios and Task Selected #.
4.4 Modify Configuration
When the test is finished, the result is saved in
a log file. Click Show Current Log to read the
log information in notepad.
There are two parts in log files: SUMMARY and
DETAIL.
Summary shows all information including model name, version, start time, use and
end time, and all the tasks performed. In Detail, it shows every task name, time used,
setting parameters (including frame count, frame gap, frame length, loss and pause
control or count, direction, source IP and destination IP for Ping), result (performance
test and link check), and final result status (including port, Tx frame, Rx frame, pause,
CRC error, checksum error, Alignment error, undersize, oversize and trigger or Tx/ Rx
request/ reply for Ping).