Filter
Top Products
POEGEM12T2SFP User Manual
78
Alloy Computer Products Pty Ltd Copyright ©2006
Join Time:
Used to specify the Join Time in units of 100
th
of a Second, Valid time range is 20
– 100.
Default: 20
Leave Time:
Used to specify the Leave Time in units of 100
th
of a Second, Valid time range is
60 – 300.
Default: 60
Leave All Time:
A time period for the announcement that all registered devices are going to be
de-registered. If a device issues a new join command, then a registration will be
kept in the switch. Valid range is 1000 – 5000 unit time.
Default: 1000 unit time
Default Applicant Mode:
There are two types of participant modes that are supported, normal participant
and non-participant.
Normal:
The switch participates normally in the GARP protocol exchanges. This is the
default setting.
Non-Participant:
In this mode the switch does not send or reply to any GARP messages, it just
listens to messages and reacts to any received GVRP BPDU.
Default Registrar Mode:
There are three types of administrative control values that can be set, they are
normal registrar, fixed registrar and forbidden registrar.
Normal:
The Registrar responds normally to incoming GARP messages. This is the
default setting.
Fixed:
The Registrar ignores all GARP messages and all members remain in the
registered (IN) state.
Forbidden:
The Registrar ignores all GARP messages and all members remain in the
unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict the creation of a dynamic VLAN when this port
receives GVRP BDU. There are two modes Enabled and Disabled.
Disabled:
The dynamic VLAN will be created when this port receives a GVRP BDU. This is
the default setting.