Filter
Top Products
Hardware Installation
The following figure illustrates a typical application of RNS5/8 Industrial
5-port/8-port Ethernet Rail Switch.
Installation and Testing
1. Take your RNS5/8 Industrial 5-port/8-port Rail Switch out of the package box.
2. Check if the DIN-Rail clip is attached to the RNS5/8. If the DIN-Rail clip is not
attached to the RNS5/8, refer to DIN-Rail Mounting section for DIN-Rail
installation. If you want to wall-mount the RNS5/8, refer to Wall Mounting
section for wall mounting installation.
3. To place the RNS5/8 on the DIN-Rail track or wall, refer to the Mounting
Installation section.
13