Filter
Top Products
SDP-950
Page 26
1 2 3
4 5
8
6 7
1 2 3
3
4 5
8
6 7
3X3 Divide Mode
3X3 Divide Mode
FOCUS
EXIT
NTSC/PAL
PRESET
SAVE
SAVE
RECALL
DIVIDE
SHIFT
ACTIVE
Nega/Posi
FREEZE
BRIGHT +
WIDE
TELE
BRIGHT -
R OTAT E
AF
AWC
3X3
F
+
-
+
-
N
RED
1
2
3
4
7
8
5
6
BLUE
MG
LAMP
DIGITAL
FOCUS
EXIT
NTSC/PAL
PRESET
SAVE
SAVE
RECALL
DIVIDE
SHIFT
ACTIVE
Nega/Posi
FREEZE
BRIGHT +
WIDE
TELE
BRIGHT -
R OTAT E
AF
AWC
3X3
F
+
-
+
-
N
RED
1
2
3
4
7
8
5
6
BLUE
MG
LAMP
DIGITAL PR
Adjusting your image
3x3 Multi-Screen (SDP-950DXA Only)
You can see all the images saved in memory simultaneously on one screen and choose one to display it.
Press 3x3 button for 2 seconds or more, then all
the images saved in memory are displayed on the
screen.
To cancel this mode and return to normal mode,
press EXIT button.
When you want to see one of them, press the
number button to recall it.
For example, if you want to see the image in
memory location 3, press BLUE + button and
the image is displayed on the screen.
Screen 2 divide and image shift (SDP-950DXA Only)
You can see both the image of an object currently projected and the image saved in memory simultaneously on
one screen.
Press DIVIDE button and press the memory location
number within 4 seconds to recall the image you want
to see.
To cancel this mode and return to normal mode, press
EXIT button.
The digital zoom is not available in DIVIDE mode,
therefore when you select DIVIDE mode under digital
zoom mode, the digital presenter automatically returns
the right live picture to the maximum optical zoom state.
You can see the
image of an object
currently projected
at right side.
The recalled image from memory appears
at left side. Press SHIFT button to shift the
image from right to left. Each time you
press the button, a third of the image will
be moved from right to left.