Altinex DS801-110 Network Card User Manual


 
SPECIAL APPLICATION
400-0438-005
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
DS801-110. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your DS801-110 and to prevent fire
and shock hazards. Please read them carefully and
heed all warnings.
1.1 GENERAL
Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
1.2 INSTALLATION
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
DS801-110 in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam
can harm internal components.
Handle the DS801-110 carefully. Dropping or
jarring can damage the unit.
Do not pull any cables that are attached to the
DS801-110.
1.3 CLEANING
Clean only with a dry cloth. Never use strong
detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.
1.4 FCC NOTICE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and; (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.