Filter
Top Products
MULTI-TASKER
10
source is working and there is still
no sound, see Cause 2.
Cause 2: The card output is turned OFF.
Solution 1: Turn ON the card output that is
used. See RS-232 accessible
commands in section 7. If no sound
is present, see Solution 2.
Solution 2: If there is still no sound, see
Cause 3.
Cause 3: Cable connections to the
destination are incorrect.
Solution: Make sure that cables are
connected properly. Also, make
sure that the continuity and wiring
are good. If there is still no sound
present, see Cause 4.
Cause 4: The destination amplifier has a
problem.
Solution 1: Make sure that the destination
amplifier is powered. If there is still
no sound, see Solution 2
Solution 2: Set the volume of the destination
amplifier to a reasonable level. If
there is still no sound, call ALTINEX
at (714) 990-2300.
8.3 SOUND DISTORTION
Cause 1: The source level is above 1V p-p.
Solution: Make sure that the source level is
below 1V p-p. If the sound is still
distorted, see Cause 2.
Cause 2: The destination amplifier provides
excessive amplification.
Solution 1: Make sure that the source level is
high enough so the destination amp
does not have to provide excessive
amplification thereby distorting the
signal. If there is still sound
distortion, see Solution 2.
Solution 2: Call ALTINEX at (714) 990-2300.
8.4 SOUND LEVEL IS LOW
Cause 1: The volume levels are
inappropriate.
Solution 1: Turn up the source volume. If sound
level is still low, see Solution 2.
Solution 2: Turn up the destination amplifier
volume. If the sound level is still low,
see Cause 2.
Cause 2: Poor signal transmission.
Solution: Check the cables for continuity and
make sure that connections are
wired properly to verify that there is
good signal transmission.
NOTE: Test the system by removing the
MT108-105 card from between the
source and the destination amplifier.
If problem persists, call ALTINEX at
(714) 990-2300.
ALTINEX POLICY 9
9.1 LIMITED WARRANTY / RETURN POLICY
Please see the Altinex website at
www.altinex.com for details on warranty and
return policy.
9.2 CONTACT INFORMATION
ALTINEX, INC
592 Apollo street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com