AMD 64 Computer Hardware User Manual


 
PID:44109 Rev:3.00 - November 2007 Family 10h AMD Phenom™ Processor Product Data Sheet
4
Family 10h AMD Phenom™ Processor Features
1 Family 10h AMD Phenom™ Processor Features
The following is a list of features and capabilities of the Family 10h AMD Phenom™ processor.
Compatible with Existing 32-Bit Code Base
Including support for SSE, SSE2, SSE3, SSE4a, ABM, MMX™, 3DNow!™ technology and legacy x86
instructions
Runs existing operating systems and drivers
Local APIC on the chip
AMD64 Technology
AMD64 technology instruction set extensions
64-bit integer registers, 48-bit virtual addresses, 40-bit physical addresses
Sixteen 64-bit integer registers
Sixteen 128-bit SSE/SSE2/SSE3 registers
Multi-Core Architecture
Triple-core or quad-core options
AMD Balanced Smart Cache
Discrete L1 and L2 cache structures for each core
Shared L3 cache structure
Machine Check Architecture
Includes hardware scrubbing of major ECC protected arrays
Cache Structures
64-Kbyte 2-Way Associative ECC-Protected L1 Data Cache
Two 64-bit operations per cycle, 3-cycle latency
64-Kbyte 2-Way Associative Parity-Protected L1 Instruction Cache
With advanced branch prediction
512-Kbyte 16-Way Associative ECC-Protected L2 Cache
Exclusive cache architecture storage in addition to L1 caches
2048-Kbyte (2-Mbyte) Maximum 32-way Associative ECC-Protected L3 Cache
Shared cache architecture storage in addition to exclusive L1 and L2 caches
Floating-Point Unit
AMD Wide Floating-Point Accelerator
128 bit Floating-Point Unit (FPU)
Virtualization Features
SVM disable and lock
Nested paging
Rapid Virtualization Indexing
Power Management
Multiple low-power states
Independent Dynamic Core Technology
AMD CoolCore™ Technology
Dual Dynamic Power Management
System Management Mode (SMM)
ACPI-compliant, including support for processor performance states
Supported power states: C0, C1, C1E, S0, S1, S3, S4, S5
Electrical Interfaces
DDR2 SDRAM: SSTL_1.8 per JEDEC specification
DDR2 SDRAM-like electrical specifications also used for clock, reset and test signals