Filter
Top Products
GA-K8NSC-939 Motherboard - 66 -
English
Completing the RAID BIOS Setup
After assigning your RAID array disks, press F7. The Clear disk data prompt appears.
NVIDIA RAID Utility May 10 2004
- Define a New Array -
RAID Mode: Mirroring Striping Block: Optimal
Free Disks
Loc Disk Model Name
Array Disks
Loc Disk Model Name
[
] Add
[
] Del
[F6] Back [F7] Finish [TAB] Navigate [
] Select [ENTER] Popup
1.0.M ST3120026AS
1.1.M ST3120026AS
Clear disk data ?
[Y] YES [N] NO
NVIDIA RAID Utility May 10 2004
- Array List -
[Ctrl-X] Exit [
] Select [B] Set Boot [N] New Array [ENTER] Detail
Boot Id Status Vendor Array Model Name
BBS 2 Healthy NVIDIA MIRROR 111.79G
Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if
the drives were previously used as RAID drives. The Array List window appears, where you can review the
RAID arrays that you have set up.
You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow
keys to select the array, then press B to specify the array as bootable.