Filter
Top Products
GA-M51GM-S2G Motherboard - 44 -
English
2-6 PC Health Status
Reset Case Open Status
Disabled Don't reset case open status. (Default value)
Enabled Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) VCORE / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current System/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function. (Default value)
CPU/SYSEM FAN Fail Warning
Disabled Fan warning function disable. (Default value)
Enabled Fan warning function enable.
CPU Smart FAN Control
(Note)
Disabled Disable this function.
Enabled When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
PC Health Status
Reset Case Open Status [Disabled]
Case Opened NO
Vcore OK
DDR18V OK
+3.3V OK
+12V OK
Current System Temperature 39
o
C
Current CPU Temperature 49
o
C
Current CPU FAN Speed 3183 RPM
Current System FAN Speed 0 RPM
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
CPU Smart FAN Mode [Auto]
System Smart FAN Control [Disabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Item Help
Menu Level`