Filter
Top Products
GENERAL FUNCTIONS AND CONTROLS CD PLAYER
A. TOP UNIT CONTROLS (FIGURE 3)
1. EJECT FUNCTION - Pressing this will eject
the CD. The eject function will only when the unit
is in cue or pause mode, this is to prevent acci-
dentally ejecting the disc when in play mode.
2. FOLDER BUTTON - This button is used to
toggle between folders and tracks. Press this
button to show the folder that is playing in the
LCD. This button is really only for Mp3 discs.
3. SGL/CTN - This function allows you to choose
between single track play or continuous track
play (all tracks in order). This function also oper-
ates in FLIP-FLOP mode.
4. TIME BUTTON - The TIME button will switch
the time value described in the TIME METER
between ELAPSED PLAYING TIME, TRACK
REMAINING TIME, and TOTAL REMAINING
TIME.
5. PITCH SLIDER - This slider is used to adjust
the playback pitch percentage. The slider is a
set adjustment and will remain set until the pitch
slider is moved or the pitch function has been
turned off. This adjustment can be made with or
without a disc in the drive. The pitch adjustment
will remain even if a disc has been removed and
will reflect on any other disc loaded into the play-
er. That is to say, if you set a +2% pitch on one
disc, remove that disc and load another, that disc
too will have a +2% pitch. The amount of pitch
being applied will be displayed in the LCD (21).
6. PITCH ON/OFF BUTTON - This button is used
to turn the PITCH SLIDER (5) function on and off.
The pitch percentage can be changed between
4%, 8%, and 16%. 4% will allow the least
amount of pitch manipulation and 16% will allow
the most amount of pitch manipulation. To adjust
to the different values please see page 22.
©American Audio® - www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 9
Figure 3
1
10
2
16
17
18
19
20
21
12
11
9
8
7
6
5
4
3
13
14
15