Filter
Top Products
Image 8 DMX™ Warning Labels
DANGER
VISIBLE LASER RADIATION
-AVOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 532 nm
Max Output : <4.9mW
Class IIIa Laser Product
©American DJ® - www.americandj.com - Image 8 DMX™ Instruction Manual Page 5 ©American DJ® - www.americandj.com - Image 8 DMX™ Instruction Manual Page 6
Image 8 DMX™ Control & Functions
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
2
8
5
4
3
6
7
1. Remote Contoller Input - This input uses a 1/4” (6.3mm) micro-
phone jack. The optional blackout controller plugs in here and is used
to control the rst unit, and other units if linked together. It controls
stand by and blackout function.
2. Microphone - This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
3. Breaker - A 2A built-in safety breaker to reduce the risk of electri-
cal shock or re and protect the circuitry. In the case of a internal short
or power surge.
4. Power Cord - This cord is used to supply main power to the
xture. Be sure the main power matches the required power of your
xture. The rated power requirements are clearly marked on the rear
panel of the unit.
1