Filter
Top Products
American DJ® - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 13 American DJ® - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 14
Fusion Scan 250 EX™ Operation
trol different functions including blackout.
Master-Slave Operation (Sound Active): This function will allow
you to link up to 16 units together and operate without a controller. The
units will be sound activated. In Master-Slave operation one unit will
act as the controlling unit and the others will react to the controlling
units programs. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The rst unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On the Master unit use the MENU button until “SLND” is displayed
press ENTER. Either “MAST”, “SL 1” or “SL 2” will be displayed.
Press the UP or DOWN buttons to set the xture to “MAST”, and
press ENTER.
3. On the slave units tap the MENU button until “SLND” is displayed,
press ENTER. Set the xture to either “SL 1” or “SL 2” and press
ENTER.
4. The slave units will now follow the Master unit.
Note: When running fixtures in Master/Slave configuration “SL
1” will make the fixture do the opposite to the other fixture.
Example: Four fixtures linked together. On fixtures 1 and 3 set
the fixture 1 to “MAST” and set xture 3 to “SL 1”, and set fixtures
2 & 4 to “SL 2”. Fixtures 1 & 2 will run the same and fixtures 2 & 4
will run opposite. This makes a great light show.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Fusion Scan 250 EX™ UC3 Control
Fusion Scan 250 EX™ DMX Traits
Channel Value Function
1 0 - 255 PAN
2 0 - 255 TILT
3 COLOR WHEEL
0 - 10 WHITE
11 - 21 RED
22 - 32 DEEP BLUE
33 - 43 GREEN
44 - 54 YELLOW
55 - 65 ORANGE
66 - 76 PINK
77 - 87 LIGHT BLUE
88 - 98 UV PURPLE
99 - 109 MAGENTA
110 - 120 ORANGE + RED
121 - 127 LIGHT BLUE + MAGENTA
128 - 255 RAINBOW EFFECT SLOW - FAST
4 GOBO WHEEL
0 - 11 OPEN
12 - 23 GOBO 1
24 - 35 GOBO 2
36 - 47 GOBO 3
48 - 59 GOBO 4
60 - 71 GOBO 5
72 - 83 GOBO 6
84 - 95 GOBO 7
96 - 107 GOBO 8
108 - 119 GOBO 9
120 - 127 GOBO 10
128 - 255 GOBO WHEEL ROTATION SLOW - FAST
5 SHUTTER/STROBE
0 - 7 BLACKOUT
8 - 15 SHUTTER OPEN
16 - 131 STROBING SLOW - FAST
132 - 247 GOBO SHAKE SLOW - FAST
248 - 255 SHUTTER OPEN
Stand by Blackout the unit
Function
1. Sync. Strobe
2. Sound Strobe
3. Two light Strobe
X/Y moving pattern
selection (12 patterns)
Gobo/Color Selection
Mode
Strobe/Sound Pattern/Sound Chase/Sound