Filter
Top Products
16 Installation and Quick Start
Quick Configuration
2. Use Ping with a size of 113 bytes to assign the IP address
defined by the ARP command. For the IP address
defined in step 1, use one of the following Ping
commands:
– Windows command format:
ping 156.205.14.141 -l 113
– LINUX command format:
ping 156.205.14.141 -s 113
3. Use Telnet to access the Management Card at its newly
assigned IP address. For example:
telnet 156.205.14.141
4. Use apc for both user name and password.
5. See “Control console” on page 17 to finish the
configuration.
Note
For the MAC address, look on the bottom of
the Management Card or on the Quality
Assurance slip included in the package.