Filter
Top Products
9
The title can be programmed either ON or OFF by selecting ON
or OFF from the tiler menu. A 20 characters title can be entered
by selecting the title from the programming menu.
3.8 Screen Setup
Character size, position, and gray scale is programmed from this
menu. Following menu pop ups when selected Screen setup
from the main program menu.
•Character Size
•Border /Gray Scale
•Horizontal Position
•Vertical Position
•Exit
Gray scale, horizontal position, and vertical position can also be
set from the front buttons without entering the programming
mode.
3.9 Communication
This programming feature let TDCT-Pro to communicate with
master or slave or with a RS-232 serial device. Following menu
pops up when communication is selected from the main menu.
•RX Baudrate 1200 to 38.8 kbaud/sec
•TX Baudrate 1200 to 38.8kbaud/sec
•Parity ODD/EVEN/NONE
•Data Bits 8/7
•Hand shake ON/OFF
•Exit
PROGRAMMING CONT.