Filter
Top Products
2
At Antec, we continually refine and improve our products to ensure the highest quality. So it's
possible that your new case may differ slightly from the descriptions in this manual. This isn't
a problem; it's simply an improvement. As of the date of publication, all features, descriptions,
and illustrations in this manual are correct.
TAKE 4 — STUDIO SERIES USER'S MANUAL
CONNECTING THE POWER
The power supply conforms to the latest ATX12V
Version 2.0 standard. It is also backwards-compatible
with previous ATX form factor power supplies. If your
motherboard has a 20-pin power receptacle, detach the
4-pin attachment on the 24-pin power connector (see
pictures 1 and 2). Before you connect the power supply
to any of your devices, please consult the appropriate
user manuals for your motherboard and other
peripherals.
[Applies only to models designed for sale in the European Union:
SmartPower 2 series power supply models designed for the EU include Power Factor Correction
(PFC) circuitry in accordance with European standard regulation code EN61000-3-2. By altering
the input current wave shape, PFC improves the power factor of the power supply. This results in
increased energy efficiency, reduced heat loss, prolonged life for power distribution and
consumption equipment, and improved output voltage stability.]
The power supply is also equipped with a 3-pin fan signal connector. Connect it to one of the
fan connectors on your motherboard. You may monitor the speed of the rear power supply fan
through your motherboard BIOS or through the monitoring software that's supplied with your
motherboard. Note: At low temperatures, the fan may run as slow as 950RPM. At these
speeds, some motherboards may not properly detect the fan speed and may generate false
warnings of fan failure. To ensure proper monitoring of the fan, please check your motherboard
manual.
POWER SUPPLY AIR DUCT
There is a special duct leading from the front of the chassis to the power supply. This design is
in place to keep the power supply quieter by providing the power supply with its own source of
air separate from the rest of the system. The power supply will draw air in from the front of
the case and exhaust it out the rear.
SIDE VENTS
There are vents on the left side of the rackmount. In an open rack environment, they increase
the airflow in the system by allowing more fresh air into the system when necessary. If you are
keeping your rackmount in a cabinet where environmental air circulation is not as good as open
Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For
more comprehensive instructions on installing your motherboard and peripherals,
please refer to the user's manuals which come with your components and drives.
Picture 1
Picture 2
For 24-pin
motherboards
For 20-pin
motherboards