Antec TPQ-1200 Power Supply User Manual


 
Table 1
Direct Cabling Connectors
+12V
Rail
24-pin main connector 3
8-pin (4 + 4) ATX12V, EPS 2
8-pin EPS12V 2
PCI-E w/ blue stripe 3
PCI-E w/ green stripe 4
Molex cable from PSU 1
SATA cable from PSU 1
P
OWER
O
UTPUT
The TPQ-1200 distributes a varying maximum number of amps on each rail. To see the output capacity and
regulation for each different voltage, see Table 2.
T
ABLE
2
Voltage Min. Load Max. Load Regulation Ripple & Noise
+3,3V 0A 25A -3% ~ +5% <50 mV
+5V 0A 30A -3% ~ +5% <50 mV
+12V1 0A 38A -3% ~ +5% <120 mV
+12V2 0A 38A -3% ~ +5% <120 mV
+12V3 0A 38A -3% ~ +5% <120 mV
+12V4 0A 38A -3% ~ +5% <120 mV
+12V5 0A 38A -3% ~ +5% <120 mV
+12V6 0A 38A -3% ~ +5% <120 mV
–12V 0A 0,5A -3% ~ +5% <120 mV
+5VSB 0A 6A -3% ~ +5% <50 mV
The continuous maximum total output power shall not exceed 1200W.
+12V1, +12V2, +12V3, +12V4, +12V5 and +12V6 DC maximum output power shall not exceed 1200W (100A).
+3.3V and +5V DC maximum combined output power shall not exceed 170W.