Anton/Bauer ProPac 13/14 Power Supply User Manual


 
- 2 -
The Logic Series
®
battery, like all professional Anton/Bauer
®
camera
batteries, is designed only in 13.2 volt and 14.4 volt configurations with
full discharge ratings of 11 and 12 volts respectfully. Thus, the Logic
Series battery will always deliver 100% capacity before the equipment
ever reaches its cutoff point. Moreover, this dependability is not affected
by temperature, memory, age or any of the other factors that can cripple a
12 volt battery.
APPLICATIONS
Virtually all cameras, camcorders, and other video field equipment
specifies a maximum voltage of 17 volts. A 14.4 volt battery will provide
superior performance and greater run time on that equipment.
CAUTION: Certain older equipment is not designed to accept 14.4
volt NiCad batteries. The 14.4 volt Logic Series battery could damage
such equipment. Check with the equipment manufacturer or the
Anton/Bauer Service Center prior to using a 14.4 volt battery. If a
question of applicability exists, the 13.2 volt Logic Series battery is
fully compatible with any equipment specifying a “12 volt DC source”.
PROPAC
The ProPac battery is the ideal source for all cameras and camcorders.
With an accessory Gold Mount Bracket, it can be used to power color
monitors, waveform monitors, vector scopes and virtually any other video
equipment designed to be operated from 12 volt DC power.
The ProPac battery is also the preferred power source when using the
Anton/Bauer Ultralight
®
or Ultralight 2 “on-camera” accessory light. The
Gold Mount Bracket features an integral “PowerTap
®
” receptacle that can
power the Ultralight directly from the battery powering the camera or
camcorder.