Filter
Top Products
- 7 -
Anton/Bauer publishes a comprehensive “Video Battery Handbook” to
help you further maximize the life and performance of your new battery.
This guide is available, at no charge, by contacting Anton/Bauer at 1-
800-422-3473 or 203-925-4991 or fax 203-929-9935.
SHORT / FUSE REPLACEMENT
The Logic Series ProPac battery has an integral externally replaceable fuse
located in the back (mounting side) of the battery:
The fuse and spare fuse are easily replaced by edging a key into the
depressions marked “A” and prying the holders up. USE ONLY A
12.5A/125 volt FUSE FOR REPLACEMENT (Anton/Bauer P/N 3713-
1271). This will insure continued protection of your battery. Replacement
with other type fuses could cause battery failure in the event of circuit
overload. It is advised to replace the spare fuse as soon as possible. Place
the blown fuse into the spare fuse holder so as to retain it in the battery.
CHARGE
STATUS
INDICATOR
ACTIVE FUSE
DIAGRAM A
“A”
SPARE FUSE