Filter
Top Products
٧ | Page
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
u
re. Follow these steps:
1. Remove the base.
2. Follow the manufacturer's instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
f
the monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
t
ions on attaching it to the wall.
Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official
m
ent of AOC.
Distance between the wall-mount holes : 100 x 100 mm
Screw specification for wall-mount : M4 x 10
Adjusting
The recommended resolution for this monitor is 1920 by 1080. To setup the monitor to this resolution, follow the steps below.
For Windows Vista:
1 Click START.
2 Click CONTROL PANEL.
3 Click Appearance and Personalization.