Filter
Top Products
3 J
Thank you very much for choosing the AOC Color Monitor.
We recommend that you take a few minutes to read carefully
through this brief but comprehensive manual before installing
and switching on the monitor. Please keep this manual in a
safe place for you future reference.
Plug & Play Drivers for the AOC Series Monitors are
available at: www.aocmonitor.com
CHECKING THE CONTENTS OF THE MONITOR
PACKAGE
The product package should include the following items:
1. Monitor
2. Owner's Manual
3. Power Cord ( Refer to the "Using the right power cord"
statement )
4. Swivel Base
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician
for help.
NOTICE :
1. The changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any,
must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modification
to this equipment. It is the responsibilities of the user
to correct such interference.
As an ENERGY STAR
Partner Envision Peripherals, Inc.
has determined that this product meets the ENERGY
STAR
guidelines for energy efficiency.
WARNING :
To prevent fire or shock hazard, do not expose the
monitor to rain or moisture. Dangerously high voltages
are present inside the monitor. Do not open the cabinet.
Refer servicing to qualified personnel only.
PRECAUTIONS
Do not use the monitor near water, e.g. near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
Do not place the monitor on an unstable cart, stand, or
table. If the monitor falls, it can injure a person and cause
serious damage to the appliance. Use only a cart or stand
recommended by the manufacturer or sold with the
monitor. If you mount the monitor on a wall or shelf, use a
mounting kit approved by the manufacturer and follow the
kit instructions.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
the monitor and to protect it from overheating, be sure
these openings are not blocked or covered. Do not place
the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register.
Do not place the monitor in a bookcase or cabinet unless
proper ventilation is provided.
The monitor should be operated only from the type of
power source indicated on the label. If you are not sure of
the type of power supplied to your home, consult your
dealer or local power company.
The monitor is equipped with a three-pronged grounded
plug, a plug with a third (grounding) pin. This plug will fit
only into a grounded power outlet as a safety feature. If
your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or use an
adapter to ground the appliance safely. Do not defeat the
safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not
be used for long periods of time. This will protect the
monitor from damage due to power surges.
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
Never push any object into the slot on the monitor cabinet.
It could short circuit parts causing a fire or electric shock.
Never spill liquids on the monitor.
Do not attempt to service the monitor yourself; opening or
removing covers can expose you to dangerous voltages
and other hazards. Please refer all servicing to qualified
service personnel.
To ensure satisfactory operation, use the monitor only with
UL listed computers which have appropriate configured
receptacles marked between 100 - 240V AC, Min. 1.5A.
The wall socket shall be installed near the equipment and
shall be easily accessible.
Attention: Disconnect the power cord to stop the power
supply to the monitor.