Filter
Top Products
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the VESA
DDC STANDARD. It allows the monitor to inform the host system of its identity and,
depending on the level of DDC used, communicate additional information about its
display capabilities. The communication channel is defined in two levels, DDC1 and
DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data channel
based on the I²C protocol. The host can request EDID information over the DDC2B
channel.
USING THE RIGHT POWER CORD:
The accessory power cord for the Northern American region is the wall plug with
NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for the power
cord shall be 125 volts AC.
Supplied with units intended for connection to power outlet of personal computer:
Please use a cord set consisting of a minimum No. 18 AWG, type SJT or SVT three
conductors flexible cord. One end terminates with a grounding type attachment plug,
rated 10A, 250V, CEE-22 male configuration. The other end terminates with a
molded-on type connector body, rated 10A, 250V, having standard CEE-22 female
configuration.