Filter
Top Products
AOC LM520
6
v3_123102
AOC LM520
Before You Operate the Monitor
Connecting the Wires Using the Power Cord Supplied
1. Connect the built-in video cable into the 15-pin
connector on the back of your computer and
tighten the two screws.
2. Connect the power cord into your LCD monitor's
Power Adapter.
3. Connect the Power Adapter to your monitor.
4. Plug the other end of the power cord into a
grounded AC outlet or UL-approved power strip.
Caution: Make sure the power cord is the correct
type that is required in your area. This LCD
monitor has a universal Power Adapter that
allows operation in either 100/120V AC or 220/
240V AC voltage areas (no user adjustment is
required).
If the AC outlet is not grounded (with three
holes), install the proper grounding adapter (not
supplied).