Filter
Top Products
LM-700
6
v3_123102
LM-700
Before You Operate the Monitor
Connecting the Wires Using the Power Cord Supplied
1. Connect the built-in video cable into the 15-pin
connector on the back of your computer and
tighten the two screws.
2. Connect the power cord into the power adaptor.
3. Plug the other end of the power cord into a
grounded AC outlet or UL-approved power
strip.
4. Connect the power adaptor into the DC IN
socket on the back of the monitor.
Caution: Make sure the power cord is the correct
type that is required in your area. This LCD
monitor has a universal power supply that allows
operation in either 100/120V AC or 220/240V AC
voltage areas (no user adjustment is required).
If the AC outlet is not grounded (with three holes),
install the proper grounding adapter (not
supplied).