Filter
Top Products
12
English
“POWER”
Press to power ON/OFF (standby) TV.
(Note:1.TV is never completely power off
unless physically unplugged.
2.Press to turn on TV after the power
on status LED had changed to the
amber color and stopped flashing. )
“VIDEO”
Press repeatedly to choose S-Video/
Composite source mode (Video 1 ~ 4).
“COMP”
Press repeatedly to choose Component
source mode (Video 5 ~ 6).
“PC”
Press repeatedly to choose VGA or
“TV”
Press to choose ATSC/NTSC TV source
mode.
“0 ~ 9 /- number”
Press to enter TV channel number to
select channel (Press ‘-’ to indicate
choosing the sub-channel).
“SLEEP”
Press to set a time period (off/30min/
60min/90min)
after which the TV should
switch
itself to standby mode.
“FREEZE”
Press to freeze the displayed picture
“VOL- / VOL+”
Press + or - to adjust the volume.
“MENU”
Press to open or exit menu.
“
”,“ ”,“＜”,“＞”,“OK”
Press to adjust the various function
items on the menu.
“DISPLAY”
Press to show the information about the
input source
、
TV channel
、
display
resolution and current time.
“MUTE”
Press to set TVsound mute ON/OFF
“PREV CH”
Press to display the previous TV
“MTS/SAP”
Press to activate the NTSC TV sounds,
such as: Stereo, SAP or Mono tone.
“WIDE”
Press to choose the display aspect as:
Normal, Wide, Zoom or Cinema mode.
“SOURCE”
Press repeatedly to choose the various
input sources (Video 1 ~ 9).
“CH- / CH +”
Press + or - to browse through the TV
channels.
“Exit”
Press to exit menu or OSD.
“VIDEO ADJ”
Press to choose the Brightness or
Contrast adjustment.
“AUDIO ADJ”
Press to switch the ATSC multi-channel
TV sounds.
“CC”
“EPG”
Press to show the information the same
as “DISPLAY” key
.
“FAV”
“V-CHIP”
Press to lock
/
unlock Parental Control
temporarily.
(After setting the restricted
table of MPAA or TV Rating.)
TO USE THE REMOTE CONTROL
.
.
HDMI source mode (Video 7 ~ 9).
Press repeatedly to change cc on/cc off/cc
on when mute
Press to turn on/off favorite mode (use CH
up and down to change after setting the
favorite TV channel on main menu)