Filter
Top Products
10
Dry Contact I/O SmartSlot Card
inputs, we recommend that an output be configured and monitored
appropriately to determine the effectiveness of an input.
• Do not wire this Dry Contact I/O SmartSlot Card when the power is on.
• The installation of this Dry Contact I/O SmartSlot Card must follow
applicable building and electrical codes.
• Do not use this card to control voltage exceeding 30 VAC or VDC.
• For proper operation, ensure that the UPS is grounded and the Dry
Contact I/O Card is secured with two screws to the UPS.
• Use only a single cord with the plastic cord grip.
See “Ratings for input contacts and output relays” on page 17 in
“Specifications” .