APC RS 550 Power Supply User Manual


 
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power
Conversion. Other trademarks are property of their respective owners.
990-3591
06/2009
Specifications
t
APC Worldwide Customer Support
VA
550 VA
Maximum Load
330 W
Nominal Input Voltage
230 V
Online Input Voltage Range
176 - 282 V
Frequency Range
50/60 Hz +
1 Hz
On-battery Waveshape
Step-approximated sine-wave
Typical Recharge Time
12 hours
Transfer Time
8 ms, maximum
Operating Temperature
32° to 104°F (0° to 40°C)
Storage Temperature
23° to 113°F (-5° to 45°C)
Unit Weight
14.8 lbs (6.7 kg)
Interface
USB
EMI Classification
CE, C-Tick, KETI
Approvals
CE, TUV-GS, GOST, A-Tick, KETI,
TISI
Technical Support http://www.apc.com/support
Internet http://www.apc.com
Worldwide +1 800 555 2725
Service
If the Back-UPS arrived damaged, notify the carrier.
If the Back-UPS requires service, do not return it to the dealer.
1.Consult the Troubleshooting section to eliminate common
problems.
2.If the problem persists, go to http://www.apc.com/support/.
3.If the problem still persists, contact APC Technical Support.
Have the Back-UPS model number, serial number and date of
purchase available. Be prepared to troubleshoot the problem
with an APC Technical Support representative. If this is not
successful, APC will issue a Return Merchandise Authoriza-
tion (RMA) number and a shipping address.
Warranty
The standard warranty is three (3) years from the date of pur-
chase in the European Community. For all other regions, the
standard warranty is two (2) years from the date of purchase.
The APC standard procedure is to replace the original unit with
a factory reconditioned unit. Customers who must have the
original unit back due to the assignment of asset tags and set de-
preciation schedules must declare such a need at first contact
with an APC Technical Support representative. APC will ship
the replacement unit once the defective unit has been received
by the repair department, or cross-ship upon the receipt of a val-
id credit card number. The customer pays for shipping the unit
to APC. APC pays ground freight transportation costs to ship
the replacement unit to the customer
.