APC SMC1000 Power Supply User Manual


 
Smart-UPS C 1000/1500 VA 120/230 Vac Tower 1
Product Description
The APC
by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). It
provides protection for electronic equipment from AC power blackouts, brownouts, sags, and surges, small AC
fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until
AC power returns to safe levels or the batteries are fully discharged.
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any
damage.
Read the Safety Guide supplied with this unit before installing the UPS.
This UPS is intended for indoor use only.
Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust
or humidity.
Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.
The battery typically lasts for two to five years. Environmental factors impact battery life.
Elevated ambient temperatures, poor quality AC power, and frequent short duration discharges
will shorten battery life.
Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension
cords.
Specifications
For additional specifications, refer to the APC Web site at www.apc.com.
Temperature
Operating 0° to 40° C (32° to 104° F)
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity
0% to 95% relative humidity,
non-condensing
0° to 40° C (32° to 104° F)
Battery Type Maintenance free, sealed lead acid